Hitachi C11XM25, Руководство по обслуживанию

Страница: 29 / 72

29
CP-X444(C11XMB)/CP-X440(C11XM25)
By the control panel By the remote control transmitter
1. Display the Advance menu by
the “MENU” button.(If EASY
MENU appears, choose “Go to
Advance menu” to display
ADVANCE MENU.)
2. Select the “OPTION” on the
menu.
3. Continue press the button [ ]
fi rst, then press the button [ ]
together with “INPUT”, and hold
for 3 seconds.
1. Display the menu by the
“MENU” button. (If EASY
MENU appears, choose “Go to
Advance menu” to display
ADVANCE MENU.)
2. Select the “OPTION” on the menu.
3. Press the “MAGNIFY OFF”
button.
Next hold the “MAGNIFY OFF”
button for 3 seconds.
To display the OSD for “HIDDEN SERVICE MENU” set up.
6-12 HIDDEN SERVICE MENU
6-13 RUN TIME window
SOFT RESET
If this is executed, all of the user data is initialized.Never use it when not required.
Set operating time display method (accumulated lamp time display method)
1. Select “ OPTION” from the Advance menu, then place the cursor on the “LAMP TIME”.
2. Press the [ ], [ENTER] or [RESET] button.
3. Press the [Reset] button once, then press [KEYSTONE] button of the remote control for 3 seconds or
more to display the screen shown below. (The menu will close after 10 seconds if there are no further
operations.)
4. Use [ ] or [ ] to select the usage status number. (The usage status is as shown below.)
Usage status number
0 ..... Total usage status
1 ..... Current usage status
2 ..... Usage status before first reset
3 ..... Usage status before second reset
||
9 ..... Usage status before eighth reset
10..... Total times of AC power on
Time
Number of times on
Number of times off
Usage status number (See below)
RUN TIME
1234
On 12
OFF 11
No.1
IR REMOTE
This is the selection of projector’s IR sensor type.
In case that the remote control does not function in the room where a fluorescent lamp is turned on, unckeck
either “1” or “2”.