manualshive.com logo in svg

Hitachi C11XM25, Руководство по обслуживанию

Поделиться
Скачать
Hitachi C11XM25 Скачать руководство пользователя страница 23

23

CP-X444(C11XMB)/CP-X440(C11XM25)

 Replacing the Lamp 

When the indicators or a message prompts you to replace the lamp, replace the lamp as soon as possible.

1. Turn the projector off, and unplug the power cord. Allow the lamp to cool for at least 45 minutes.

2. Prepare a new lamp.

3. After making sure that the projector has cooled adequately, slowly 

turn over the projector, so that the bottom is facing up.

4. Please unhook the claws of the lamp cover, and remove the lamp 

cover.

5. Loosen the 2 screws (marked by arrow) of the lamp, and slowly pick 

up the lamp by the handles.

6. Insert the new lamp, and retighten firmly two screws that are loos-

ened in the previous process to lock it in place.

7. Interlocking the 2 tabs of the lamp cover to the projector, position 

the lamp cover on the projector. Then push the center point of two 

claws to fix the lamp cover.

8. Slowly turn the projector so that the top is facing up.

9. Turn the projector on, and reset the lamp time.

(1) Select the item of LAMP TIME in OPTION of Advance menu

(2) Press the RESET, ENTER or [ ] button. LAMP TIME reset 

window will appear.

(3) Choose RESET using [ ] button.

NOTE

  • When the lamp has been replaced after the message of “THE POWER WILL BE TURNED OFF 0 

hrs later.” is displayed, complete the following operation within 10 minutes of switching power on.

Incorrectly resetting of the lamp timer (resetting without replacement, or neglect of resetting after 

replacement) will result in incorrect message functions.

Lamp cover

Screws marked 

by arrow

Claws

Center point
of claws

Tabs

Claws

Содержание C11XM25









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды