FM Operation
Switching from DAB to FM Mode
To switch the unit to FM mode, Press MODE repeatedly to select FM mode. The display will
show the frequency.
Auto Scan
Press /SCAN until the tuner starts searching for a station. To scan down the frequency
band, press and hold /SCAN. Once a station has been found, the scanning will stop
automatically.
The search may not stop at a station with a very weak signal.
Manual Scan
To search for FM stations manually, press
repeatedly until your desired frequency is
reached.
With FM radio it may be necessary to fine tune each station by pressing
repeatedly. Each
press/tap will adjust the frequency by 0.05MHz. If reception is still poor adjust the position of the
aerial or try moving the radio to another location.
Scan Setting
This is a scanning option to scan all stations, or just scan stations with strong signal.
1. Press and hold MENU/INFO on the unit or press MENU on the remote control and then
press
to select <Scan setting>. Press /ENTER/PAIR on the unit or ENTER on
the remote control to confirm.
2. Press
to select <All stations> or <Strong stations only>. Press /ENTER/PAIR on
the unit or ENTER on the remote control to confirm.
GB
22
