DAB Operation
If the unit is connected to the mains power and then switched on from standby for the first
time, the unit will automatically enter into the DAB mode and perform auto scan function.
During the scan the display will show “Scanning…” together with a slide bar that indicates
the progress of the scan and the amount of stations that have been found so far.
Once the scan has finished, the unit will select the first alphanumerically found station. To
explore the found stations, press
.
Full Scan
The full scan will search for the entire DAB Band III channels. After the scan has finished, the
first alphanumerically found station will be automatically selected.
1. To activate auto scan, press /SCAN and the display will show “Scanning …” and a
progressing slide bar.
2. Or press and hold MENU/INFO button on the unit or press
MENU button on the remote control, then
to select
<Full scan>. Press /ENTER/PAIR button on the unit or
ENTER button on the remote control to confirm. The display will show “Scanning...”
and a progressing slide bar.
3. All the stations that have been found will be stored automatically. To explore and listen
to the found stations, press
to select.
Manual Tuning
As well as the auto tune function, you can manually tune the receiver. This can help you
when aligning your aerial or when adding stations that were missed while auto tuning.
1. Press and hold MENU/INFO button on the unit or press MENU on the remote control
and then press
to select <Manual tune>.
Press /ENTER/PAIR on the unit or press ENTER on the remote control to confirm.
2. Press
to cycle through the DAB channels, which are numbered from 5A to 13F.
3. Press /ENTER/PAIR on the unit or press ENTER on the remote control to add selected
channel to station list.
Secondary Services
You may see a “>” symbol after the name of the station, this indicates that there are
secondary services available to that station. These secondary services contain extra
services that are related to the primary station. e.g. a sports station may want to add extra
commentaries. The secondary services are inserted directly after the primary station in the
station list.
To select the secondary station, press /ENTER/PAIR on the unit or ENTER on the remote
control when the “>” appears in the display before the station name. When the secondary
service ends, the unit will automatically switch back to the primary station.
GB
19
