Repeatedly press the EQ button to select different preset EQ modes, the display will show in sequence
with each press: “NORMAL > POP > ROCK > CLASSIC > JAZZ > NORMAL > ……”.
To stop the sound from the speakers temporarily, press the Mute button, the display will show “MUTE” and
flash. The sound stops and the unit remains on.
To cancel mute, press the Mute button again or the /- button, “MUTE” disappears in the display
and the sound is restored.
Press the X-Bass button to toggle this function between on and off. The display will show “BBS ON” or
“BBS OFF”. When the X-Bass is on, the bass sound is enhanced.
PRESET EQ
PRESET EQ
MUTE FUNCTION
MUTE FUNCTION
X-BASS FUNCTION
X-BASS FUNCTION
17
This function allows you to switch on the system at your desired time and mode:
1. Press the Timer button to toggle the timer function between on and off, the display will show “TIMER
ON” or “TIMER OFF”. The “TIMER” icon will be on to indicate timer function on.(F.20)
2. When the timer function is on and the time selected has arrived, the system will switched on to the
mode as set.(F.21)
3. To set the timer, press and hold the Timer button until the display shows the timer status, the “hour”
digit of the timer clock will flash.
4
. Press the
◀◀ or ▶▶ button to set to the desired hour and press the
Timer
button to confirm, first set the
hour and then finally the minute.
5
.
T en you will enter into the timer mode setting, press the ◀◀ or ▶▶ button to select your desired mode -
h
CD, USB, SD/MMC or RADIO, finally press the
Timer
button to confirm. The timer setting is now
completed.
Note: Set the Radio to the desired mode FM/DAB and station before placing unit into standby.
6. Press the standby button to place the unit into standby mode.
TIMER FUNCTION
TIMER FUNCTION
TIMER
DAB
F20
TIMER
DAB
F21
The brightness of the display is automatically adjusted for the room light conditions. It will be reduced
when the room lighting is turned off so as to match your environment. The display will brighten
automatically in the daylight or when the room lights are turned on again for better visibility.
Note: The dimmer sensor is located at the top of the display unit, to obtain the best performance of the
dimmer function, the sensor must not be obstructed.
DISPLAY DIMMER
DISPLAY DIMMER
