CD
F12
CD
F13
When you move the system to another part of the country, your pre-tuned and stored DAB stations may no
longer be available. If this is the case then you will need to reset your radio back to its original factory
settings; to perform a factory reset, please do the following:
1. Switch on the system and select DAB mode.
2. Press and hold the Info/Display button for longer than two seconds, when the display shows “Manual
Tune”, repeatedly press the Info/Display button until “System Reset” is displayed.
3. Press the Select button to confirm, the display first show “System Reset” and then finally perform
services full scan function. If you press the Select/Program button when “Press Prog for defaults”
appears, DAB presets 1-4 will automatically be set to default stations if available.
4. When the scan has finished , the radio will automatically select the first alphanumerically found station.
Note: All of your stored DAB & FM presets will be lost once the reset has taken place.
NOTE : Although this CD/MP3/WMA player can read CD-R and CD-RW discs in addition to normal CDs, the
playability of CD-R and CD-RW discs may be affected by the type of software that was used to create
the discs, as well as the quality and condition of the blank media you are using, 100% playability cannot
be guaranteed. This is not an indication of a problem with the player.
1. Press the CD button to select CD function. The display will show “CD READY...”and the “CD” icon.
2. Insert the disc with the printed label side aligned with printed artwork. The display will first show
“ Reading” and then finally the total track/folder number and time.(F. 12)
3. To start playback from the beginning, press the
button once.
4. To interrupt playback, press the button again, the display will show “PAUSE” and the elapsed time in
the display will flash.(F. 13)
5. To resume playback, press the button again.
6. To stop playback, press the button, the display will show “STOP”.
FACTORY RESET
FACTORY RESET
LISTENING TO YOUR COMPACT DISCS
LISTENING TO YOUR COMPACT DISCS
Playing the entire CD
This describes the style of the programme that is being broadcast.
Audio bit rate
The display will show the digital audio bit rate being received.
In normal operation, press and hold the Info/Display button for longer than 2 seconds to enter into the
advanced display mode. When the display shows “Manual Tune”, repeatedly press the Info/Display
button, the display will cycle through the following modes:
System Reset
Software Version
Manual Tune
Press Info/Display >2s
Normal
Programme type
ADVANCED DAB DISPLAY MODES
ADVANCED DAB DISPLAY MODES
11