Hitachi Aloka Medical ASU-1003 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 44

Hitachi Aloka Medical ASU-1003 Скачать руководство пользователя страница 21

-15-

MN1-5008 Rev. 7

3. Preparations for Use

3-1. Start up check

3-1-1. Visual check

Visually check the insertion portion,handle, cable and connector.

If any holes, indentations, abrasion, cracks, deformation, looseness, discoloration, or other

abnormalities are found, do not use the equipment.

3-1-2. Verification of washing, disinfection and sterilization

Verify that washing, disinfection and sterilization are conducted according to the intended use.

3-1-3. Verification of operation

Connect to the ultrasound diagnostic instrument by following the instructions in section 4-4

“Connecting to the ultrasound diagnostic instrument” and check that the selected scanner match the

convex display and the displayed frequency and check the image for errors.

Verify that there are no abnormal vibrations or noise.

Remarks

For details on the displayed screens, see the documentation supplied with the ultrasound diagnostic

instrument.

Warning

Be sure to preparations for use.

Using the scanner without noticing an abnormal condition can result in injury to the operator or

patient. If an inspection finds an abnormal condition in the scanner, immediately stop use and

contact one of our offices and/or distributor's offices listed on the back cover.

Caution

Do not use the scanner, if displayed image shape or frequency is not match with selected scanner.

An incorrect acoustic output can result in burns or other injuries to the patient. Contact one of our

offices and/or distributor's offices listed on the back cover.

«
...
19
20
21
22
23
...
»

Содержание ASU-1003













































Отзывы:

Нет отзывов