Hitachi Aloka Medical ASU-1003 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 44

Hitachi Aloka Medical ASU-1003 Скачать руководство пользователя страница 19

-13-

MN1-5008 Rev. 7

2-3. Performance

For measurement tolerances, operating tolerances and other data, refer to the instruction manual for the

ultrasound diagnostic instrument.

2-4. Names of each parts

Caution

Do not pull, bend, twist, or apply excessive force to the cable.

The conductors may break and the cable may become unusable.
Do not subject the ultrasonic irradiation area to hard impact.

This could make the scanner unusable.

Rubber boot

This covers the insertion portion

for preventing infection. Follow

the instructions in section 4-2.

Insertion portion

The component that is inserted into

the patient.

Handle

This section is held when

performing insertion.

Connector

This is the part that connects the ultrasound

diagnostic instrument and scanner. Follow

the instructions in section 4-4.

Cable

This cable propagates the

ultrasonic signals that are

sent and received.

Ultrasonic irradiation area

This incorporates an electronic

convex transducer.

The protrusion corresponds

to the front mark (direction

mark) on the image display.

This mark indicates the way of

mechanical drive in Vol-mode.

«
...
17
18
19
20
21
...
»

Содержание ASU-1003













































Отзывы:

Нет отзывов