Extra Rinse
An extra rinse is added when each time pressing the "
Extra Rinse
" button. Up to 3
rinses can be selected, to prolong the rinse cycle.
The times of rinses can be displayed.
This option is particularly suitable for areas with very soft water or for washing the
baby linen.If someone has an allergy to detergent, an extra r inse cycle will remove
excessive detergent from the washing.
Wash Time
Wash time can be changed when press the "
Wash Time
" button, according to
different programme, the range of 90~10 minutes is max. Please refer to the
quick guide for the information about duration length of each wash program.
.
.
.
11
12
Spin Time
This function is only suitable for spin programme.
For the Spin Program, pressing the button to select any one kind of time such as
5 minutes, 8 minutes, 10 minutes, and 14 minutes.
Spin Speed
Every programme has a predefined spin speed mode please refer to the program
chart.
Press the button to set different spin speed.
If spin speed "
0
" is selected, the final spinning is cancelled, and the water is
drained out only. However, intermediate spin phases remain during rinse.
Rinse hold
If you select "
Rinse Hold
" mode, the laundry remains in the last rinse water
without progressing to the final spin cycle, to avoid creasing and prevent colours
from changing.
To terminate the "
Rinse Hold
" by draining the water, without any spinning,
press the "
Start /Pause
" button.
To terminate the "
Rinse Hold
" mode by spinning the laundry, press the "
Spin
"
button to select the desired spin speed and then press the "
Start /Pause
"button
to start the spin cycle.
Delay
The "
Delay
" mode allows running the machine at the consumer's convenience,
for example at night when electricity is cheaper.
Select programme, temperature and other options.
Press the "
Delay
" touch button to select the delay time up to 23 hours.
Press the "
Start/Pause
" button. Indication lights up and the countdown of the
delay time begins.
The time delay indication disappears when the programme starts and it is
replaced by the remaining programme time.
Once having pressed the "
Start/Pause
" button, the number of hours preselected
can be reduced by pressing again the "
Delay
" button.
To cancel the
"
Delay
"
.
.
.
..
.
.
.
..
.
.
.
Before you press the "Start/Pause" button:
Turn the programme selector to different position or press the "
Reset
" button.
After having pressed the "Start/Pause" button:
Press the "
Reset
" button for at least 3 seconds - the start delay time disappears
from the time display.
I.Program
Washing programmes have factory pre-set values for water temperature, spin speed,
etc. Those original pre- set values can be changed to suit your personal preferences
using the I. Program function. If you want to change pre-set values:
Select the desired program
Modify values as required (speed, time, temperature)
.
.
Press "
I. Program
" for 3 seconds or more
.
-
Foam Clear
If you want to improve the rinse performance ,you can add rinse times or press
"Foam Clear " button before you start the program. In "Foam Clear" function,
the machine enters more water in the last rinse to improve the rinse
performance(For Model HWFR6510).
Spray
If you want to improve the rinse performance,you can add rinse times or press
"Spray " button before you start the program. In "Spray" function, the water
enters the machine in multi ways during rinse cycle to remove the residual
detergent much better(For Model HWFR9012V).
Press the "
Start/Pause
" button.
The modified programme will be stored in memory for later use; press "I. Program"
to use it again in your next wash. The original programme remains unchanged and
available for selection with the Programme Selector knob as usual.
.
To cancel the End Sound
Press the"
Extra Rinse"
and "
Delay
" buttons at the same time for at least 3
seconds, the end sound can be turned off or turned on
Change programme and/or options after programme start
Press the "
Start/Pause
" button to pause the programme.
Select the new programme (with temperature, any options and another spin speed
if you want).
Press the "
Start/Pause
" button again. The new programme continues at the same
position where the previous programme was interrupted. Do not add detergent for
this programme.
.
.
.
