Water supply hose
Check the supply hose regularly for brittlenes s and cracks and replace it if
necessary using a new hose of the same type (available from After -Sales Service or
specialist dealer).
Mesh filter for water connection
Check and clean regularly.
For washing machines with an inlet hose as shown on
Fig."G".
G
15
16
Pour about 1 litre of water into the detergent drawer to check that the filter
isinserted properly and securely.
Reinstall the plinth.
Plug in the appliance once again.
Select a programme and then press "Start/Pause"button.
Detergent dispenser
E
F
downward and remove the drawer (Fig. "E").
Remove the cover grid from the fabric softener
compartment.
Remove the separator from the main wash compartment
by pulling it upward (Fig. "F").
Wash all the parts under running water.
Refit the separator and the grid in the detergent drawer
and fit the drawer back inside its housing.
Press the release lever in the main wash compartment
Close the tap and loosen the inlet hose on the tap.
Clean the internal mesh filter and screw the water inlet hose back onto
the tap.
Now unscrew the inlet hose on the rear of the washing machine.
Pull off the mesh filter from the washing machine connection with
universal pliers and clean it.
Refit the mesh filter and screw the inlet hose on again.
Turn on the tap and ensure that the connections are completely water -
tight.
Draining residual water
Before emptying the residual water, switch the appliance off and
unplug it from the
mains socket. Remove the plinth. Place a container beneath it to collect the water.
Take out the emergency hose and unplug it to drain the residual water .
Open the filter but do not remove it completely. Slowly turn the filter
counterclockwise until the water begins to drain out.
Wait until all the water has drained.
Now unscrew the filter completely and remove it.
Tilt the appliance forward carefully to allow the water to flow out.
Refit the filter and screw it in clockwise as far as it will go.
Refit the plinth.
Before using the washing machine again:
Pour approx. 1 litre of water into the detergent drawer
to check that the filter
is inserted properly and securely.
Plug in the appliance once again.
.
.
.
.
..
.
.
.
.
.
.
.
.
.
.
..
.
11
12
13
14
a
b
d
c
