Video Settings
UM23.8A User Manual, 99183A, June 2022
25
Setup Menu
Description
Source scan
Allows the user to turn source scan "On" or "Off." When Source
scan is enabled and there is no active video signal present, the
display will cycle through video connections until a video source
is detected�
Advanced Setup
The Advanced Setup submenu contains two additional settings:
• Smart ISP
flashes the video board firmware. Do not
activate without assistance from Hope Industrial technical
support�
• CVT Mode
set to "On" will force the display to only render
VESA CVT standard signals. When set to "Off" (the default
setting) the display will use its entire internal lookup table
when syncing to an incoming video signal. CVT Mode
should only be set to "On" as a troubleshooting step if the
display is having trouble syncing to an analog video signal.
• DVI EDID
set to "Analog" will output the EDID information
as an analog format. When set to "Digital" it will output the
EDID information as a Digital format.
