HIS HIS-UM23.8 Series Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 36

HIS HIS-UM23.8 Series Скачать руководство пользователя страница 11

Installation Instructions

UM23.8A User Manual, 99183A, June 2022

11

Single-Touch Resistive models include both USB and Serial (RS-232) ports for touch screen

operation, but only one of these should be connected to the computer� When both ports are

available on the computer, USB is preferred�

Installing the Driver: USB Connections

1�

Do not plug the USB connection into the computer until the driver installation is

complete� If the USB connection has already been made, disconnect at this point�

2�

Download the appropriate driver for your operating system from the address listed

above� Click to "Run" the software when prompted�

3� Follow the on screen prompts to complete the driver installation�

4� Once the driver has been successfully installed, the USB connection can be made by

inserting the connector through the monitor's integrated cable retention bracket and

into the USB port� Connect the other end to the USB port on the host computer�

5� Proceed with Calibration (below)�

Note: detailed and up-to-date USB driver installation instructions can be found at the

following address:

https://www.hopeindustrial.com/blog/calibrating-a-touch-screen/

Installing the Driver: Serial (RS-232) Connections

Serial Connections must be made before installing the driver.

1� Connect one end of the Serial cable to the Serial input port on the rear of the monitor�

Connect the other end to the Serial port on the host computer. Tighten the screw

locks on the cable connectors to ensure adequate strain relief�



HAZ

LOC

NOTE: If this step is not performed, the product will not comply with

Class I, II, III, Division 2 Hazardous Location requirements.

2�

Download the appropriate driver for your operating system from the address listed

above� Click to "Run" the software when prompted� Follow the on screen prompts to

complete the driver installation�

3� Proceed with Calibration (below)�

«
...
9
10
11
12
13
...
»

Содержание HIS-UM23.8 Series





































Отзывы:

Нет отзывов