Programming Procedure
© PAT
Rev. C 06/15/00 // CSH
056-065 / 190005_c.doc
13
4.2.1 Setting of Reevings
The operator can activate the setting procedure by pushing the button “Reevings/Hoist Winch” (7).
After pushing the button one time an asterisk will appear on the display beside the number
of reevings, indicating that the procedure of setting the reevings is activated. To enter a
new number of reevings the operator has to select the value by pushing the buttons “UP”
(12) or “DOWN” (11).
If the operator wants to continue with the displayed number of reevings (parts of line) he
has to confirm by pushing the button “OK” (10).
After pushing the button “OK” (10) the procedure for Number of Reevings is completed.
The operating screen will be displayed, which shows the measured crane data. Complete Section 5.
PRE-OPERATION INSPECTION to ensure the data shown is correct.
4.2.2 Selecting the Hoist Winch
The procedure for selecting the hoist winch can be activated by the operator by pushing the button
“Reevings/Hoist Winch” (7) two times.
After pushing the button two times an asterisk will appear on the display beside the
symbol for the hoist winch.
Select either the main hoist “UP” (12) or the auxiliary hoist using the button “DOWN”
(11).
Select the hoist or winch that is currently being used, and confirm by pushing the “OK” (10) button.
The operating screen will be displayed, which shows the measured crane data. Complete Section 5.
PRE-OPERATION INSPECTION to ensure the data shown is correct.
16
*
*
