Operator’s Manual
EI65 / 0005
© PAT
Rev. C 06/15/00 // CSH
056-065 / 190005_c.doc
8
11 “Down” Button
The button “Down” (11) is used to get a decrease of a numerical value at the display
during the programming and setting procedures and to move through the different
menus in “Down” direction. The instruction to use this button will be given on the display.
12 “Up” Button
The button “Up” (12) is used to get an increase of a numerical value at the display
during the setting procedure of limits and operating conditions.
13 Data Display
The Display (13) will show technical information as well as operating information and instructions for
the operator.
120.0
112000lbs
88.5
81.0
47.5
16
During crane operation the readout will display the actual load, the tip height, the boom length, the
boom angle, the working radius, the selected hoist winch and the number of reevings (parts of line). In
case of a system error an error code is displayed in place of the reevings.
During the setting procedure of the Operating Conditions and the limit setting procedure the display
shows the setting values and information for the operator.
