HIOS Neji Taro II HS-35, Руководство по эксплуатации

Страница: 9 / 20

- 8 -
5-2. Operating this machine
Connect the accessory AC adapter plug to the DC jack on the
rear of this machine, and the other side to a power outlet.
Turn on the main power switch. The lamp incorporated in
the power switch will illuminate.
Turning on the power switch causes the drive motor to rotate
normally, the bin scooper plates to move up and down, and
the rail to vibrate. After a while, the loaded screws are
sequentially transported along the rail and delivered to
the stopper. If the screw is not picked up for an extended
period of time, the vibration will automatically
come to a stop. At the moment the screw is picked up,
this machine resumes operation.
Operational features
・ This machine is equipped with an overload protection circuit.
If a movable part is overloaded during a feeder operation, for instance, when a small screw or other particles is trapped, or exces-
sive screw is placed into the screw bins, the overload protection circuit will activate.
Function descriptions and remedies
Under normal conditions, the drive motor in this machine rotates in normal direction to feed the loaded screws continuously to the
escaper section, thereby allowing you to obtain the screws successively. However, if any movable section is overloaded, the drive
motor will rotate in reverse direction for a predetermined period of time and then resumes its normal rotation. When the cause of
the overload is eliminated upon motor reversal, the motor reverts to its normal rotation, resuming normal scret supply.
If the cause of the movable section overload is not cleared upon motor reversal, the overload protection circuit performs the reverse
rotation and normal rotation repetition cycle for a predetermined period of time and then shuts off power supply to the drive motor.
When the power to the drive motor shuts off as above, please turn off the power switch and clear the cause of overload. For in-
stance, when the screw bins are overloaded with screws, reduce the number of screws in the bins. If a screw or other article is
trapped in a movable section, please remove it with tools. After the cause of the overload is eliminated, turn the power switch back
on (power-on reset) and resume operation.
Power switch
Indicator lamp incorporated
DC plug
AC adapter
DC jack