HIOS Neji Taro II HS-35, Руководство по эксплуатации

Страница: 11 / 20

- 10 -
5-3. Picking up the screw
Attach a bit to your electric screwdriver to match the head of the
screw. Refer to the following.
Notice: The screwdriver bit must be magnetized before use.
Put the driver bit somewhere in the opening of the bit guide and
push it straight down while turning the bit slightly, until it hits the
screw head.
Vibration of the rail shall stop when the screwdriver bit reaches the
bottom of the screw head slot.
Then pull the screw out towards yourself.
Be careful not to push the screwdriver bit into the screw head with
too much force. If the driver is lowered into the screw head with
moderate force, vibration of the rail shall stop.
Do not use more pressure than necessary to stop movement of the
rail.
Screw driver
Employed SCREW
Bit guide
①
②
Shaft of stepped
Bits
Phillips head
Screw dai. Shap of bit.
M3.5
H4,H5 #2 Φ3.2 M4.0
M5.0