Hioki SM7810 страница 10 Скачать руководство пользователя | Manualshive

Страница: 10 / 69

background image

1.1 Product Overview and Features

7

The instrument is an 8-channel, high-sensitivity ammeter for use in measuring

insulation resistance. It can perform insulation measurement of target objects

such as electrical insulators with high resistance values, measuring all 8 chan-

nels simultaneously at high speed. The instrument is designed for use in applica-

tions such as automatic insulation testing, particularly of capacitors.

This insulation measuring instrument requires an external measurement power

source to be provided by the operator. HIOKI offers a recommended power

source (Model SM7860 series Power Source Unit).

Overview

Chapter 1

1.1 Product Overview and Features

Easy integration into automated testing sys-

tems

The instrument features a standard external I/O inter-
face, allowing contact check results and comparison
judgment results to be downloaded to other devices.
Additionally, external I/O can be used to easily change
target objects, making it easy to integrate the instru-
ment into an automated testing system.

High-speed insulation resistance measurement

The instrument is a high-sensitivity ammeter for use in in-
sulation resistance measurement applications. The time
from trigger activation to index output is as little as 7 ms.

TRIG

INDEX

Judgment

7 ms (min)

C.C.

Measu

rement

Machine cycle

8-channel simultaneous measurement

The instrument can measure 8 channels simulta-
neously, boosting production volume. This capa-
bility improves on previous HIOKI instruments,
which offered 4 channels.

充電3

充電1

充電2

充電ｎ

測定1

測定2

1列

8列

Charge 2

Charge 1

Charge 3

Charge n

Measure 1

Measure 2

Row 1

Row 8

Compatibility with high-

capacity capacitors

Range: 100 pA to 1 mA
The instrument features an ex-
panded current measurement
range to accommodate increas-
ingly high-capacity MLCCs, mak-
ing possible more accurate pass/
fail judgments.

Interface communications

The instrument can be connect-
ed to a control device and con-
trolled via either its GP-IB or RS-
232C interface. Measurement
data can also be downloaded.

Contact check for improved reliability

The instrument can check for poor contact with the ob-
ject under measurement using the capacitance detec-
tion method, and the results of this check can be
output from the instrument.

«
...
8
9
10
11
12
...
»

Содержание SM7810






































































Отзывы:

Нет отзывов

Похожие инструкции для SM7810

Бренд: Yardistry Страницы: 9

Бренд: Keiser Страницы: 2

Бренд: ECA Страницы: 3

Бренд: Nautilus Страницы: 12

Бренд: Panasonic Страницы: 30

Бренд: R.M. Young Страницы: 10

Бренд: TATU Страницы: 30

Бренд: Rane Страницы: 4

Бренд: Sabio Страницы: 182

Бренд: Tar River Страницы: 44

Бренд: Tar River Страницы: 61

Бренд: Waters Страницы: 250

Бренд: Waters Страницы: 141

Бренд: uniprox Страницы: 3

Бренд: York International Страницы: 16

Бренд: X-10 Страницы: 12

Бренд: Equinox Systems Страницы: 8

Бренд: Poulan Pro Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды