61
Retaining the Measured Value
Automatically retaining the measured value when
the value stabilizes (AUTO HOLD)
(Hold measurement value)
Measured value stabilizes
Blinks
(Waiting for measured
value to stabilize)
Re-connection
(Waiting for measured
value to stabilize)
Press for at least 1 sec.
ement value)
abilizes
for measured
stabilize))
Meas
Re-co
Lights up
Lights up
Press
for at least 1 second.
(HOLD blinks, the instrument is
waiting for the measured value to
stabilize.)
When the measured value stabilizes,
a beeping sound is generated and the
value is retained. (HOLD lights up.)
When the test leads are moved
away from the measurement object,
reconnected again, and the measured
value stabilizes, a beeping sound is
generated and the new measured value
is retained.
When
is pressed while HOLD
is lit, the instrument returns to the wait
state. (HOLD blinks.)
Press
for at least 1 second to
cancel auto hold mode.
• If the input signal is too small for the relevant range, the measured
value cannot be automatically retained.
• The measured value is automatically retained after it remains
stable (for approx. 2 seconds) within the stable range.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
