Hioki CM7290, Инструкция по эксплуатации, Страница: 55 / 80

51
Functional Specifications
No. Functions Description
Factory settings
and notes
9 Warning displays • If input exceeds the range, the range f.s.
value is didplayed with OVER segments
flashing.
• When output peak exceeds the range, the
lights up
−
10 Auto power
save
(APS)
• Power is switched off if no operation is
performed for approx. 10 minutes
• When this function is enabled, APS lights up
The APS becomes disabled in one of the
following conditions:
• Automatically disabled during output or
during MAX/MIN/AVG display
• If enabled before output turns on, will be
re-enabled when output turns off
• When being driven by an AC adapter.
Enabled, but will
be disabled by
power-on option
11 Battery power
warning display
Displays battery remaining power
−
12 External power
source
When using power from the AC adapter
terminal (external power supply terminal), the
unit is always on, and the lights up.
−
13 Backlight auto-off Automatically turns off the backlight Factory setting:
enabled
14 Buzzer sound Buzzer sound Factory setting:
enabled
15 Power-on option Turn on the power while pressing key
See “Tables of Key Operations” (p. 15).
−
16 Save settings • Configures the settings mode at startup.
• Pressing the [MODE SAVE/RESET] key
when is not lit up will set
the current measurement mode to the startup
mode.
• Pressing the [MODE SAVE/RESET] key
when
is lit up will cancel
the saved setting.
• will light up when
performing this command or when startup up
with it enabled. will turn off
when the mode or setting is changed.
Factory setting:
OFF (disabled)
17 Output • Output varies with the designated mode.
• Can be output simultaneously with the
analysis display function (other than PEAK
output).
• Output is ground output when the output
mode is disabled.
Factory setting:
OFF
10
9
8
7
6
5
4
3
2
1
Appx.
Ind.