Hioki CM7290, Инструкция по эксплуатации

Страница: 44 / 80

40
Bluetooth® Communications (only for CM7291)
Pairing the app with the CM7291
Home>Other
1
Instrument
Settings
2 3
The instrument is automatically
registered
4
Return to the home screen.
• When the app is launched for the first time (before being paired with any
instrument), the instrument settings screen will be displayed.
• While the mobile device is displaying the instrument settings screen, simply move
it close to a CM7291 to automatically pair it with the instrument (the app can be
paired with up to 8 instruments).
• Allow about 5 to 30 seconds for the instrument to pair with the app after being
turned on. If the instrument fails to pair within 1 minute, relaunch GENNECT Cross
and cycle the instrument’s power.
• For previously registered instruments, the operations described above can be skipped.
Making measurements with the Bluetooth
®
function
Select the general measurement, logging, or wave graph function on the home
screen. For more information about each function, see the help function in the
GENNECT Cross.
A value displayed in the app and that displayed on the instrument may differ from
each other due to communication delay or discrepancy between display update rates.
A statistical value calculated from logged values and an analytical value displayed on
the instrument may differ from each other.
General Measurement
Saves measured values from
multiple channels
Logging
Simple logging (up to 24 hours)
For CM7291, several keys
are disabled while logging is
performed.
Wave Graph
Simple oscilloscope
No waveforms are displayed
during PEAK output or with
Hz function set.