Hioki CM7290, Инструкция по эксплуатации

Страница: 35 / 80

31
Connecting to an External Device
2.5 Connecting to an External Device
If the unit is to be used in combination with another device, use the output cord
(optional) to connect to the external device.
If the sensor cable is not long enough, use an extension cable (optional).
See “Options” (p. 2).
Insert the output cord all the way into the unit. Otherwise the contacting will be poor
and the measured value will not be output accurately.
Remove cap
1
Output jack
Output cord
2
Insert
3
Connect*
External device
*: The connection method will depend on the option(s) used (see below).
Using an L9095 Output Cord:
1
BNC
terminal of
external
device
L9095 connector
Align guide with groove to insert
2
Twist the terminal to the right to
lock it in place
10
9
8
7
6
5
4
3
2
1
Appx.
Ind.
22