Hioki 9625, Инструкция по эксплуатации

Страница: 11 / 72

1.2 Specifications
5
HIOKI
(2) Time-Series Graph Display
(3) Summary Function
(4) Harmonic Display Function
Graphic display item Voltage, current, active power, reactive power, apparent power,
power factor, frequency, integrated active power, integrated reactive
power, demand, voltage unbalance factor, harmonic (level, content,
phase angle, total value, and THD)
Y-axis upper/
lower-limit setting The position of the vertical axis (Y-axis) of the graph (upper limit and
lower limit) is set by moving the slider or entering numbers.
Interval setting
(selectable from these pre-
sets) 1 cycle/0.1 sec, /0.2 sec, /0.5 sec, /1 sec, /2 sec, /5 sec, /10 sec, /15
sec, /30 sec, /1 min, /2 min, /5 min, /10 min, /15 min, /30 min, /1 hr, /2
hr, /3 hr, /4 hr, /6 hr, /8 hr, /12 hr, /1 day
Display-period setting
• The analysis start date and stop date are selectable during the overall
period of the measurement data.
Analysis start date (year/month/day/hour/min/sec):
Enter appropriate numbers.
Analysis stop date (year/month/day/hour/min/sec):
Enter appropriate numbers.
• Period of measurement data (from the measurement start date to the
stop date) may be displayed.
Reference-value setting The set reference value is displayed.
Graph type selection Line graph, bar graph, 2-axis graph, and 3-dimensional graph
Line style/color setting Line style and line color are selectable separately for each piece of
data. Marker display is available.
Stacked bar graph display Displays a stacked bar graph of up to 16 pieces of data
(demand value/demand volume)
Cursor measurement Displays the measurement of a point selected using the cursor
Data-display unit setting Data is displayed according to a selected unit; a unit of the engineer-
ing unit system (m, k, M, G, etc.).
Display-item selection Select items to be displayed on the summary.
Daily, weekly, and monthly
report Sums up the data of a selected period and displays a daily, weekly, or
monthly report
Load-factor calculation Calculates the load factor/demand factor of a daily, weekly or
monthly report, and displays the result
Total per time segment Divides one day into a maximum of four segments, and sums up the
data of each segment
CO
2
conversion display Display the integrated active power (kWh) in CO
2
according to the
conversion rate.
Waveform display Displays the waveform of the data for a selected date
List display Displays a list of the harmonic data for a selected date
Graphic display Displays a bar graph of the harmonic data for a selected date
Cursor measurement Cursor measurement is available in the waveform display and the
graphic display.