5.1 Basic Operation
33
HIOKI
Set Display Name
Set the name of each display item to be used in printout. Left-click on
the display name of an item, and the Display name dialog will appear.
Check the Create setting manually box to set the display name of each
item separately. To use a common display format, choose symbols in
the list to enter them in the Common display name text box.
(2) Set Data Interval
Set a data interval for the displayed data.
NOTE
• An interval smaller than the interval of the loaded data cannot be set.
When multiple pieces of data have been loaded, a larger interval will be
used.
• If the data interval is set to other than an integral multiple of the measure-
ment interval, the display may not show the actual data.
(3) Set Display Time
Set the start time and stop time of data to be displayed as a summary.
NOTE
If the display start time is set to a time other than (measurement start
time + a multiple of the measurement interval by an integer), the dis-
played time will differ from the actual time. Thus, measurements made
immediately before the displayed time of each interval will be dis-
played as made at the actual time.
Содержание 9625
