4.1 Basic Operation
27
HIOKI
(3) Set Data Interval
Set a data interval for the displayed data.
NOTE
• An interval smaller than the interval of the loaded data cannot be set.
When multiple pieces of data have been loaded, a larger interval will be
used.
• If the data interval is set to other than an integral multiple of the measure-
ment interval, the display may not show the actual data.
(4) Set Display Time
Set the start time and the stop time of the data to be displayed in a
graph.
NOTE
If the display start time is set to a time other than (measurement start
time + a multiple of the measurement interval by an integer), the dis-
played time will differ from the actual time. Thus, measurements made
immediately before the displayed time of each interval will be dis-
played as made at the actual time.
(5) Move Display Range
The display period may be changed by moving the scroll bar.
(6) Set Display Period
The display period may be changed by moving the slider for the dis-
play period.
NOTE
• A maximum of 336 measurements may be displayed on a graph display at
any one time.
• Any changes in settings (3) to (6) above will be reflected in the settings for
the summary screen.
(7) Measure with Cursor
Left-click in the graph display area, and the cursor will appear. The
measurement of the point at which the cursor is located will be dis-
played. To move the cursor, left-click at a point to which the cursor is to
be moved. The cursor can also be moved using the
and
keys on
the keyboard. To hide the cursor, left-click anywhere outside the graph
display area.
NOTE
Cursor measurement is not available for 3D graphs.
Содержание 9625
