Hioki 3290-10, Инструкция по эксплуатации

Страница: 19 / 152

1.3 Identification of Controls and Indicators
13
1
2
3
4
5
6
7
8
9
10
11
O
vervi
ew
Notation for multi-button operations
Buttons Operations
+ : Press Button A and button B at the same time.
Example:
SHIFT
+
Press the
SHIFT
and
POWER
buttons at the same time.
→
: Press Button A and then press Button B.
Example:
SHIFT
→
After pressing the
SHIFT
button ( appears on the dis-
play), press the
POWER
button.
A B
A B
Turns power ON/OFF.
+ : Cancels saved settings (returned to factory defaults) and erases
stored measurement data.
(see pages 100 and 101)
+ : Disables the auto power-off function.
(see page 104)
+ : Turns off the beeper.
(see page 107)
SHIFT + : Stored data such as integral values can be reviewed.
(see page 103)
• Pressing this button causes to display, indicating that the additional function
(in blue letters) allocated to each button is available. To turn off, press the
SHIFT button again.
• Some buttons may be locked when is on.
• Holding the SHIFT button while pressing the button to turn the meter
on enables review of stored data such as integral values.
(see page 103)
• Selects the current and frequency measurement mode.
DC
→
AC
→
AC+DC
→
Hz
(see page 52)
• Button presses are ignored while TIME is displayed.
SAMPL
(
SHIFT
→
):
• Switches display of refresh rate and measurement response time.
(AC and AC+DC modes)
(see pages 90 and 92)
NORMAL (twice/ sec)
→
SLOW (once/ 3 sec)
→
FAST (10 times/ sec)
DC mode is fixed at once per second.
• The display update rate is usually set to NORMAL.
(Note that there is no indication for
NORMAL
.)
• SLOW decelerates the speed of updating on-display measurement.
(with
SLOW
on)
Measurement response time also becomes SLOW.
• FAST accelerates the speed of updating on-display measurement.
(with
FAST
on)
Measurement response time also becomes FAST.