Hioki 3290-10, Инструкция по эксплуатации

Страница: 74 / 152

68
4.5 Current Integration
4.
Press the buttons to set the timer (from 1 minute to 99
hours, 59 minutes).
: Increment/decrement digit
: Move cursor to another digit
5.
Press the button to move the cursor to the right to display
the repetition setting.
6.
Press the buttons to set the number of times to repeat
the measurement (up to 20 repetitions).
7.
Press
SHIFT
→
(
INPUT/SET
) to accept your settings.
Blinking
Blinking
Blinking
• By using the timer, an integral can be measured over a speci-
fied interval.
• The integration time set on the timer can be repeated up to 20
times. For example, a 30 minute integration time might be
repeated 10 times.
• If you don’t need repeated integral measurements, or if you
want to cancel the repetition setting, set the value on the repe-
tition display to "1" (the default setting).
• To cancel the timer setting, set the timer to zero.
• During repeated measurements, in addition to the timer tolerance,
a maximum 0.1-second delay can occur per timer interval (timer
setting).
• When the timer stops automatically, appears and ten min-
utes later, the meter turns itself off.