manualshive.com logo in svg

Hioki 2300 Smart Site, Инструкция по эксплуатации, Страница: 339 / 366

Поделиться
Скачать
Hioki 2300 Smart Site Скачать руководство пользователя страница 339

326

20  2392-01/02 MODULE BASE

(2) Installing the Module Base

Fasten the module base securely using either method below.

Mounting the Module Base on a DIN Rail

Use the DIN rail mount connector on the rear of the base to mount
the module base on a DIN rail (35 mm/1.38" wide).

1.

Pull down the DIN rail mount lever.

2.

Hang the top hook of the DIN rail mount connector on the DIN rail
and push in the bottom of the module.

3.

Push up the DIN rail mount lever until it clicks into place.

Dismounting the Module Base from the DIN Rail

Pull down the DIN rail dismount lever using a flat blade screwdriver
and remove the module base from the DIN rail. Use the module as
the fulcrum for the screwdriver.

• Do not mount the module base on the ceiling where it may fall off.

• The module base shall be fastened using the proper means. 

If the module base slides right and left due to tolerances of the
DIN rail dimensions, modules may fall off, wires may be short-
circuited, or circuits broken.

Содержание 2300 Smart Site















































































































































































































































































































































































Отзывы:

Нет отзывов