Hioki 2300 Smart Site Скачать руководство пользователя страница 241

Страница: 241 / 366

228

12 2342-20 OUTPUT MODULE

Setting the Module ID

You can connect up to 63 modules (measurement, input/output,
and link) to one communications module.

Setting Procedure

Use the module ID setting dial to set the ID No. of the
module to a number from 01 and to 63. (You cannot
set a number other than the above.)

12.2 Settings

• Ensure that the set ID is not used for any other module con-

nected to the same communications module.

• The ID numbers of modules need not be consecutive.
• Setting the ID to 99, then turning on the power resets all inter-

nal settings to the defaults.

• For COM ID, see the instruction manual for the communica-

tions module.

Содержание 2300 Smart Site















































































































































































































































































































































































Результаты поиска

Содержание 2300 Smart Site

Отзывы:

Hioki 2300 Smart Site, Инструкция по эксплуатации, Страница: 241 / 366

Результаты поиска

Содержание 2300 Smart Site

Отзывы: