CONFIGURATION
18
6 RESET Button
The RESET switch (
SW10
) is a small push-button, located
directly below dipswitch (
S2
). See the image to the right, and/or
Figure 2
on page 5 for location of the RESET button.
The RESET switch, when pushed, will restart the AT Series
Communication Module without resetting the charger's Main
Control PC Board (A1). This is useful when configuration
changes are made via the dipswitches (
S1
and
S2
), or the setup
program (terminal emulator). Any changes made to the
configuration will not take effect until after the communication
module is reset.