HIMS Inc.
BookSense XT – User Manual
refer to 5.17 Setting the Moving Mode to Time.
Note: If there is no “time” information, moving by time won’t be shown unit to move by.
5.10 Changing preamp
You can change to “preamp” mode by pressing the UP or DOWN button. Afterwards, if you
press the LEFT or RIGHT button, it increases or decreases by preamp level 1. The range of
preamp you can select is from -5 to +6. It is saved automatically if the file is Audio Daisy
type. So you do not need to change preamp when you open the file later.
Note: “Preamp” to the unit to move by which means the volume is increased or decreased in
the Daisy player. So users can select the volume their preference, much louder than the
maximum volume of the BookSense XT.
5.11 Moving by Mark
If you have setup Mark in content, you can press the UP or DOWN button to change to
Moving by Mark and by pressing the LEFT or RIGHT button, it shifts to previous or next
Mark. Note that you cannot change to Moving by Mark if there is no Mark in the content,
regardless of pressing the UP or DOWN button.
Note: Here are 3 different setting modes to move by mark.
1) Mark: you will move to the location of the mark and start reading.
2) Voice memo: you will move to the location of the voice memo and BookSense says voice
memo that you have recorded. Then it starts reading from the location of voice memo.
3) Highlight mark: you will move to the start point of the highlight mark. Then it starts
reading the interval of highlight mark and pause. Every time you press the OK button, it
keeps reading the interval that you have selected. To press the PLAY button, it starts
reading the end of the highlight mark.
Note: If you press the CANCEL button while reading the interval, it will move to the end
of the highlight mark and read.
5.12 Moving by Level
Moving by level will allow you to move anywhere from level 1 to level 6. If the current file has
levels 1 through 3, then level 1, level 2, and level 3 is spoken as a unit to move by when you
press the UP or DOWN button to change the unit to move by. If the current book contains
levels 1 through 6, then the BookSense XT announces from level 1 to level 6 on the unit to
35