HIMS Inc.
BookSense XT – User Manual
4.12.5 Deleting a Mark
If you have inserted a mark into a file, you can delete marks as needed. Refer to following
steps to delete the marks:
1) Press number 3 button while the file is playing or paused.
2) You will hear, “Enter the mark number to delete, edit box.” Enter the number of the mark
that you want to delete.
3) Press the OK button. Then “Mark ## has been deleted” is announced and the file isgin
playing again.
Note: In step 2, you can delete the mark regardless type of mark.
Note: In step 3, if the number is used as voice memo or highlight mark, then “Voice memo ##
or highlight mark ## has been deleted” is announced.
However, if you enter the number that does not exist, “This mark does not exist” is
announced and you is returned to the book. Or beyond the range of 1~1,000, BookSense
says “Enter range from 1 to 1,000, edit box” and you need to enter the number range from 1
to 1,000.
To cancel deleting the mark, press the CANCEL button in step 2 before entering the number.
Or press the CANCEL button instead of the OK button in step 3; to delete all numbers you
have entered, press the CANCEL button until you have deleted all numbers. After all
numbers have been deleted, you will hear a ding. Then, press the CANCEL again to close
the edit box. Note that the CANCEL button acts as a backspace key and you cannot cancel
out of an edit box until you delete all numbers. While the file is playing or in a pause status,
you can simply delete all marks in the file by pressing number 3 button for more than 2
seconds.
Note: If you delete the highlight mark while reading the interval, highlight mark is deleted and
it keeps reading.
4.13 Adjusting the Playing Speed
While playing or in pause status, you can adjust playing speed by using numeric buttons.
Pitch might be up or down while playing MP4, OGG if sample rate is over 44,100 Hz.
Also, pitch changing could be occurred regardless of sample rate if you change playing
speed while playing WMV, ASF.
4.13.1 Play Slower
If you want to decrease the speed, press number 4 button. Every time that you press this
button, the speed decreases by 1 level. You can decrease the rate from the default level
24
