HIMS Inc.
BookSense XT – User Manual
hold status, buttons will not function regardless the device is on/off. Just push up the Hold
switch when you want to unlock them.
2.17 Marks used in BookSense XT
There are 3 type of mark in BookSense XT. They are “Mark”, “Voice memo”, and “Highlight
mark.”
1) Mark: It is a function to check specific point of a file. If you insert a mark at the point you
want to remember, it will move to that point immediately in wherever.
2) Voice memo: It is a function to insert a voice memo that is recorded by voice to specific
point of a file. If you insert a voice memo at the point you want remember, it will move to
that point immediately in wherever.
3) Highlight mark: It is a function to underline specific point of a file. You can hear from
beginning to end of section that you have set repeatedly. Also, if you insert a highlight
mark at the point you want to remember, it will move to that point immediately in
wherever.
2.18 Stop the voice
BookSense XT allows you to stop the voice when you move in file list. You can use this
function when you are recognizing situation properly and further voice information is not
required.
1) When moving in file list: Press the CANCEL button to stop the voice information for
contents of file list.
2) When switching the storage device: Press the CANCEL button to stop voice while
switching the storage device using 0 button.
3) When checking file information: Press CANCEL button to stop voice while checking file
information using 0 button in file list.
If you stop the voice, pressing the CANCEL button executes original functions that exit the
current program or make a beep sound.
14
