HIMA HIMatrix F20, Руководство пользователя

Страница: 44 / 56

4 Start-Up F20
Page 44 of 56 HI 800 143 E Rev. 1.01
4.4.5 Pulsed Outputs for F20
System Signal R/W Description
Mod.SRS [UDINT] R Slot number (System Rack Slot)
Mod. Type [UINT] R Type of module, target value: 0x00B5 [181
dec
]
Mod. Error Code
[WORD] R Module error code
Coding Description
0x0000 I/O processing, if required with errors, see other error
codes
0x0001 No I/O processing (CPU not in RUN)
0x0002 No I/O processing during the booting test
0x0004 Manufacturer interface operating
0x0010 No I/O processing: incorrect configuration
0x0020 No I/O processing: fault rate exceeded
0x0040/
0x0080
No I/O processing: configured module not plugged in
DO.Error Code
[WORD]
R Error code of the TO unit as a whole
Coding Description
0x0001 Error of the TO unit as a whole:
DO
[
xx
]
.Error Code
[BYTE]
R Error code of the individual digital pulsed output channels
Coding Description
0x01 Fault in the digital pulsed output module
DO[xx].Value
[BOOL] W Output value for DO channels:
1 = output energized
0 = output de-energized
Pulsed outputs must not be used as safety-related outputs!
Table 34: ELOP II Factory - Pulsed Output System Signals