HIMA HIMatrix F20, Руководство пользователя

Страница: 37 / 56

F20 4 Start-Up
HI 800 143 E Rev. 1.01 Page 37 of 56
System parameter Data
type R/W Description
Module.Error Code WORD R Module error code
Coding Description
0x0000 I/O processing, if required with errors,
see other error codes
0x0001 No I/O processing (CPU not in RUN)
0x0002 No I/O processing during the booting test
0x0004 Manufacturer interface operating
0x0010 No I/O processing: incorrect configuration
0x0020 No I/O processing: fault rate exceeded
0x0040/
0x0080 No I/O processing: configured module not
plugged in
Module.SRS [UDINT] R Slot number (System Rack Slot)
Module.Type [UINT] R Type of module, target value: 0x00A5 [165
dec
]
1)
LS/LB (LS = short-circuit, LB = open-circuit)
Table 27: SILworX - System Parameters for the Digital Inputs,
Module
Tab
4.3.2.2
DIO 8/8: DO Channels
Tab
The
DIO 8/8: DO Channels
tab contains the following system parameters.
System parameter Data
type R/W Description
Channel no. --- R Channel number, defined by default
-> Error Code
[BYTE] BYTE R Error codes for the digital output channels
Coding Description
0x01 Fault in the digital output module
0x02 Channel shutdown due to overload
0x04 Error while reading back the digital outputs
0x08 Error while reading back the status of the
digital outputs
0x20 Impossible to activate the output (wrong
configuration)
Value [BOOL] -> BOOL W Output value for DO channels:
1 = output energized
0 = output de-energized
Channel Used
[BOOL] ->
BOOL W Configuration of the digital channels as input or output:
1 = The digital channel is used as output
0 = The digital channel is used as input
Table 28: SILworX - System Parameters for the Digital Inputs,
DIO 8/8: DO Channels
Tab