HIMA HIMatrix F20, Руководство пользователя

Страница: 36 / 56

4 Start-Up F20
Page 36 of 56 HI 800 143 E Rev. 1.01
4.3.2 Digital Inputs and Outputs for F20
The following tables present the statuses and parameters for the digital input and output
module (DIO 8/8) in the same order as given in the Hardware Editor.
4.3.2.1
Module
Tab
The
Module
tab contains the following system parameters.
System parameter Data
type R/W Description
DI No. of Pulse
Channel USINT W Number of pulsed outputs (supply outputs)
Coding Description
0 No pulsed output planned for LS/LB
1)
detection
1 Pulsed output 1 planned for LS/LB
1)
detection
2
Pulsed outputs 1 and 2 planned for LS/LB
1)
detection
… …
4
Pulsed outputs 1...4 planned for LS/LB
1)
detection
Pulsed outputs must not be used as safety-related
outputs!
DI Pulse Delay
(10E-6s) UINT W Waiting time for line control (detection of short-circuits or
cross-circuits)
The initial value for the
DI Pulse Delay
system parameter in
SILworX must be set to at least 500 µs.
DI Pulse Slot UDINT W Pulse module slot (LS/LB
1)
detection), set the value to 2
DI.Error Code WORD R Error codes for all digital inputs
Coding Description
0x0001 Fault within the digital inputs
0x0002 FTT test of test pattern faulty
DO.Error Code WORD R Error codes for all digital outputs
Coding Description
0x0001 Fault within the digital outputs
0x0002 MOT test of safety shutdown returns a fault
0x0004 MOT test of auxiliary voltage returns a fault
0x0008 FTT test of test pattern faulty
0x0010 MOT test of output switch test pattern faulty
0x0020 MOT test of output switch test pattern
(shutdown test of the outputs) faulty
0x0040 MOT test active shutdown via WD faulty
0x0200 All outputs are switched off, total current
exceeded
0x0400 FTT test: 1st temperature threshold
exceeded
0x0800 FTT test: 2nd temperature threshold
exceeded
0x1000 FTT test: Monitoring of auxiliary voltage 1:
Low voltage