Hilti TE SX, Оригинальная инструкция по эксплуатации, Страница: 19 / 37

15
Trouble shooting
Symptom Possible cause Possible solution
The tool doesn’t start Fault in the electric power supply Plug in another electric tool and check
whether it starts
Defective supply cord or plug Have it checked by an electrical
specialist and replace if necessary
Switch defective Have it checked by an electrical
specialist and replace if necessary
No hammering action The tool is too cold Allow tool to reach the minimum
operating temperature
(see section “Preparation for use”)
The tool does not produce Cross-section of the extension Use an extension cable of adequate
full power cable is inadequate cross-section
(Switch for automatic function (see section “Before use”)
in OFF position)
The tool does not switch to faster Switch for automatic function is Move switch for automatic function to
speed after the given time defective OFF position and have the electronic
(approx. 5 sec.) switch immediately replaced
(Switch for automatic function
in ON position)
The drill bit cannot be released The chuck locking sleeve is not Turn the chuck locking sleeve fully
from the chuck turned fully towards the towards the ( ) symbol (fig.  )
( ) symbol (fig.  )
EC declaration of conformity (original)
Description: Rotary hammer
Designation: TE SX
Year of desing: 2000
We declare, under our sole responsibility, that this product
complies with the following directives and standards:
2006/42/EC, 2004/108/EC, EN 60 745-1, EN 60 745-2-
6, EN ISO 12100, 2011/65/EU.
Disposal
Most of the materials from which Hilti power
tools are manufactured can be recycled. The
materials must be correctly separated before
they can be recycled. In many countries, Hilti has already
made arrangements for taking back your old electric tools
for recycling. Please ask your Hilti customer service
department or Hilti sales representative for further infor-
mation.
Only for EU countries
Disposal of electric tools together with household waste
is not permissible!
In observance of European Directive on waste electrical
and electronic equipment and its implementation in
accordance with national law, electric tools that have
reached the end of their life must be collected separately
and returned to an environmentally compatible recycling
facility.
Hilti Corporation , Feldkircherstrasse 100,
FL-9494 Schaan
Paolo Luccini Jan Doongaji
Head of BA Ececutive Vice President
Quality and Process Management BU Power Tools & Demolition
Business Area
Electric Tools & Accessories
01/2012
01/2012
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
Printed: 07.07.2013 | Doc-Nr: PUB / 5136127 / 000 / 00