Hilti PR 300-HV2S Скачать руководство пользователя

Страница: 16 / 31

Protection class

IP 66 (in accordance with IEC 60529), except battery

compartment

Drop test height

2 m (6.56 ft)

1 The drop test was carried out using the PRA 83 receiver holder, dropped onto flat concrete under standard ambient conditions

(MIL-STD-810G).

PRA 84 Li‑Ion battery

Rated voltage (normal mode)

7.2 V

Maximum voltage (during operation or during charging

while in operation)

13 V

Rated current

180 mA

Charging time

Tempe32°C (+90 °F): 2 h 10 min (battery 80 %

charged)

Operating temperature range

-20…+50°C (−4…+122 °F)

Storage temperature range (dry)

-25…+60°C (−13…+140 °F)

Charging temperature range (also for charging during

operation)

+0…+40°C (+32…+104 °F)

Weight

0.3 kg (0.66 lb)

PUA 81 AC adapter

AC supply

115…230 V

AC frequency

47…63 Hz

Rated power

36 W

Rated voltage

12 V

Operating temperature range

+0…+40°C (+32…+104 °F)

Storage temperature range (dry)

-25…+60°C (−13…+140 °F)

Weight

0.23 kg (0.51 lb)

5 Before use

NOTE

The tool may be powered only by a Hilti PRA 84 or PRA

84G battery.

5.1 Inserting the battery

1. Slide the battery into the tool.

2. Turn the catch in a clockwise direction until the

“locked” symbol appears.

5.2 Removing the battery

1. Turn the catch in a counter-clockwise direction until

the “unlocked” symbol appears.

2. Remove the battery from the tool.

5.3 Charging the battery
5.3.1 Charging a battery for the first time

Charge the battery fully before using it for the first time.

NOTE

Make sure the system to be charged is standing securely.

5.3.2 Recharging a battery

1. Check that the outer surfaces of the battery are

clean and dry.

2. Insert the battery in the tool.

NOTE

Li‑ion batteries are ready for use at any time,

even when only partly charged.

Charging progress is indicated by the LEDs when

the tool is switched on.

5.4 Options for charging the battery

NOTE

Make sure that the recommended temperature range is

observed when charging (0 to 40°C / 32-104°F).

DANGER

The PUA 81 AC adapter is for indoor use only. Avoid

ingress of moisture.

Printed: 28.08.2015 | Doc-Nr: PUB / 5244524 / 000 / 00

Содержание PR 300-HV2S
































Результаты поиска

Содержание PR 300-HV2S

Отзывы:

Похожие инструкции для PR 300-HV2S

Бренды по названию

Популярные бренды

Hilti PR 300-HV2S, Руководство по эксплуатации

Результаты поиска

Содержание PR 300-HV2S

Отзывы:

Похожие инструкции для PR 300-HV2S

Бренды по названию

Популярные бренды