![background image](http://html1.mh-extra.com/html/hilti/dst-20-ca/dst-20-ca_original-operating-instructions_2136362032.webp)
28
English
2328430
*2328430*
7
Preparing the saw system for use
7.1 Mounting the saw head
CAUTION
Risk of injury!
Inadvertent starting of the product.
▶
Unplug the supply cord before making adjustments to the power tool or before
changing accessories.
WARNING
Risk of personal injury and damage to the equipment or other property!
The saw
presents a hazard if it falls.
▶
Before releasing the saw head, make sure that the guide rollers are positioned correctly
relative to the rail and that the locking lever is fully engaged.
▶
Before releasing the saw head locking levers, make sure you are holding the saw head
securely.
@
Clamping lever with integral release
button
;
Release button
=
Guide roller
%
Guiding surface
1. Press the release button
(2)
and engage the clamping lever
(1)
in the bottom latched
position (opened).
If the locking lever cannot be latched on the opened or closed position, do not
proceed with the installation operation
2. Lift the saw head by the grips and place the saw head on the previously fastened rail.
▶
Make sure that the guide rollers are positioned correctly: The guiding surface
(4)
of
the rail must be the middle of the guide rollers.
3. Press the release button
(2)
and pull the clamping lever
(1)
completely to the top
latched position (closed).
▶
If the locking lever does not engage correctly, discontinue the saw head installation
operation and remove the saw head from the rail!
When mounted horizontally, with the saw blade positioned below the rail, the
saw head must be lifted by hand in order to close the locking lever.
Put the product into operation only when it can be locked on the rail correctly
and securely.
Содержание DST 20-CA
