![background image](http://html1.mh-extra.com/html/hilti/ds-ws10/ds-ws10_operating-instructions-manual_2136339063.webp)
10. Troubleshooting
Current input is too high when idling and
sawing (DS WS10-E)
The system is overloaded
– Reduce sawing advance pressure.
– Check that the sawing wire moves easily and elimi-
nate any causes of resistance to movement.
– Reduce the length of cut, i.e. the length of wire in
contact
A phase is missing
– Check the electric supply.
– Check the fuses
in the control unit and replace them
if necessary.
1
1
1
10.18
The service indicator lights and the drive
unit may be inoperative
– The saw has been in operation for at least 200 hours.
The drive unit and control panel must be returned for
servicing as soon as possible in order to prevent dam-
age.
– The saw has been in operation for 250 hours and the
safety cut-out has been activated in order to prevent
serious damage.
The ground fault circuit interrupter has been
tripped
Insulation fault
– Have the equipment and the electric supply checked
by a qualified electrician.
The total leakage current exceeds the ground fault
circuit interrupter’s tripping value
– Disconnect other appliances from the mains supply
used (especially those with an HF electric drive).
10.19
10.20
63
5
Printed: 08.07.2013 | Doc-Nr: PUB / 5069736 / 000 / 01
Содержание DS WS10
