Hilti DS WS10, Руководство по эксплуатации

Страница: 28 / 68

5. Safety instructions
than those intended could result in hazardous situa-
tions.
d) Use only the genuine Hilti accessories or ancillary
equipment listed in the operating instructions. Use of
accessories or ancillary equipment not listed in the
operating instructions may present a risk of personal
injury.
e) Take the influences of the surrounding area into
account. Do not use the machine where there is a risk
of fire of explosion. Electric tools and machines gen-
erate sparks which may ignite dust or gas.
f) Keep the grips dry, clean and free from oil and grease.
g) Do not overload the machine. It will work more effi-
ciently and more safely within its intended performance
range.
h) Never leave the machine unattended.
i) Store machines in a secure place when not in use.
When not in use, machines must be stored in a dry,
high place or locked away out of reach of children.
j) Always disconnect the machine from the electric sup-
ply when it is not in use (e.g. during breaks between
working), before making adjustments, before carrying
out care and maintenance and before changing saw-
ing wires. This safety precaution prevents the machine
starting unintentionally.
k) Remove any adjusting key or wrench before switch-
ing the machine on. A wrench or a key left attached to
a rotating part of the machine may cause personal injury.
l) Before use, the machine, the sawing wire and acces-
sories must be checked carefully to ensure that all items
function faultlessly and as intended. Check that mov-
ing parts function correctly without sticking and that
no parts are damaged. All parts must be fitted correctly
and fulfill all conditions necessary for correct opera-
tion of the machine. Damaged parts must be repaired
or replaced properly by an authorized service center.
m) Avoid skin contact with drilling slurry.
n) Wear a protective mask during work that generates
dust, e.g. dry cutting. Connect a dust removal system.
Cutting materials hazardous to the health (e.g. asbestos)
is not permissible.
o) Follow the instructions concerning care and main-
tenance.
p) Children must be instructed not to play with the
machine.
q) The machine is not intended for use by children, by
debilitated persons or those who have received no
instruction or training.
Electrical safety
a) Take steps to avoid the risk of electric shock. Avoid
body contact with earthed or grounded surfaces such
as pipes, radiators, ranges and refrigerators.
b) Check the machine’s supply cord at regular intervals
and have it replaced by a qualified specialist if found to
be damaged. Check extension cords at regular inter-
vals and replace them if found to be damaged.
c) Check the condition of the machine and its acces-
sories. Do not operate the machine and its accessories
if damage is found, if the machine is incomplete or if
its controls cannot be operated faultlessly.
d) Do not touch an electric cable that has been dam-
aged while working. Switch off at the main switch and
unplug the cable at the power outlet.
e) Damaged or faulty switches must be replaced at a
Hilti service center. Do not use the machine if it cannot
be switched on and off correctly.
f) Have the machine repaired only by a trained electri-
cal specialist (Hilti service center) using genuine Hilti
spare parts. Failure to observe this point may result in
risk of accident to the user.
g) Do not use the supply cord for purposes for which
it is not intended. Never carry the machine by the sup-
ply cord. Never pull the plug out of the power outlet by
pulling the supply cord.
h) Do not expose supply cords to heat, oil or sharp
edges.
i) Connect the machine and its ancillary equipment only
to a power source equipped with an earth conductor
and ground fault circuit breaker (PRCD). Check that
these items are in perfect working order before oper-
ating the equipment. Install an earth/ground rod if a
generator is used.
j) Make sure that the mains voltage corresponds to the
specification given on the type plate.
k) Electric cables and their plug connectors must be
kept dry. When not in use, close power outlets with the
cover provided.
l) Use only extension cables which have an adequate
5.4
28
Printed: 08.07.2013 | Doc-Nr: PUB / 5069736 / 000 / 01