Hilti DS WS10, Руководство по эксплуатации

Страница: 27 / 68

5. Safety instructions
exit points in order to reduce the risk of whiplash in the
event of wire breakage. The whiplash effect causes
great acceleration of the sawing wire, resulting in parts
of the wire lashing out or flying off with great force.
d) Make sure there are no objects such as scaffolding
etc. within the wire whiplash area. In the event of wire
breakage, the whiplashing end of the wire may be deflect-
ed in an unexpected direction by such objects.
e) The danger area has a radius of at least twice the
free length of wire that would be unleashed in the event
of wire breakage (shown in yellow) and also includes
the areas in the extended axes of the direction in which
the wire is running (shown in gray). The danger area
cannot be limited unless suitable means of protection
are employed (protective walls, curtains or wire guards
etc.). The protective devices must be arranged and
mounted in a way that stops the wire lashing out in the
event of wire breakage and reliably prevents objects or
fragments flying off.
f) The operator is responsible for cordoning off the
area. If necessary, safety personnel must be posted to
prevent access to a wide area around the workplace.
r
1
=
l
1
x
2
r
2
=
l
2
x
2
r 3
=
l
3
x
2
l
3
l
1
l
2
STOP
STOP
STOP
g) When setting up and operating the saw system and
when removing parts that have been cut away, always
ensure that no persons are below the area in which you
are working. Falling objects could cause serious injury.
General safety instructions
a) Use the machine only when you have read the oper-
ating instructions and you are familiar with the points
described, and when you have received appropriate
training from a Hilti specialist on safe operating pro-
cedures. All warnings and instructions must be observed.
b) Use the right machine for the job. Do not use the
machine for purposes for which it was not intended.
Use it only as directed and when in faultless condition.
c) Use the machine, accessories and sawing wires etc.,
in accordance with these instructions and in the man-
ner intended for the particular type of machine, taking
into account the working conditions and the work to
be performed. Use of this machine for operations other
5.3
r
1
=
l
1
x
2
r
2
=
l
2
x
2
l
2
l
1
STOP
STOP
27
Printed: 08.07.2013 | Doc-Nr: PUB / 5069736 / 000 / 01