hilscher netFIELD OnPremise, Руководство пользователя

Страница: 23 / 152

Hardware description 23/152
4.3.3 LEDs of the LAN interface
LEDs indicating state of the LAN communication (see section Positions of
the LEDs on the device [
}
page 21]).
LED Color State Meaning
LINK
See positions
(2) and (4)
Duo LED green/orange
(green)
On 1 GBit network connection
(orange)
On 100 MBit network connection
(off)
Off 10 MBit or no network connection
RX/TX
See positions
(3) and (5)
LED yellow
(yellow)
On The device does not send/receive Ethernet
frames.
(yellow)
Flickering
(load
dependent) The device sends/receives frames.
(off)
Off The device does not send/receive Ethernet
frames.
Table 10: LEDs LAN interface
4.3.4 LEDs of the Real-Time Ethernet interface
LEDs (6) ... (11) in section Positions of the LEDs on the device [ } page 21]
relate to the Real-Time Ethernet network (OT network) that is connected to
the RTE ports of the device (labelled as
Fieldbus on the device housing).
Names and functions of these LEDs depend on the protocol of the Real-
Time Ethernet container that you have deployed on your device. They are
therefore not described in detail here.
Note:
The COM LED (position (7) in section Positions of the LEDs on the
device [
}
page 21]) shows steady red light if the TCP/IP channel of
the cifx0 interface is enabled. See section OT Interface (Using the
cifx0 interface or RTE) [
}
page 119] for further information.
netFIELD OnPremise | User manual
DOC200901UM02EN | Revision 2 | English | 2021-06 | Released | Public © Hilscher 2021