Local Device Manager
71/152
Use case a: Using
one
proxy server for multiple protocols.
Ø
If the HTTP, HTTPS and/or FTP communication in your local network is
handled by a single proxy server, select the
Use this proxy server for
all protocols
option.
Figure 41: Using one Proxy server for all protocols
Ø
In the
Host
field, enter the appropriate prefix of the protocol that the
proxy server is using, followed by its IP address or host name, e.g.:
http://192.168.20.122
Ø
In the
Port
field, enter the number of the port that the proxy server is
using.
Ø
If your proxy server requires authentication, select the
Authentication
required
option and enter
Username
and
Password
of the server.
Ø
In the
No Proxy
section, you can specify destinations that shall not be
handled by the proxy server(s). Multiple entries in the
Host
field must
be separated by comma.
Important:
Do not change or remove the
localhost
and
127.0.0.1
entries
in the
No Proxy
section. These are “internal” addresses of the
netFIELD OS that cannot be handled by a proxy server because
they are required for internal communication. You can, however,
add further exceptions in the
Host
field.
netFIELD OnPremise | User manual
DOC200901UM02EN | Revision 2 | English | 2021-06 | Released | Public
© Hilscher 2021
