Local Device Manager
90/152
DHCP Server Configuration dialog
Figure 56: DHCP Server Configuration dialog
Parameter
Description
Interface IP
address
IP address of your wlan0 interface/access point.
Note
: IP address settings of the wlan0 interface must be defined
under
Networking
>
Interfaces
>
wlan0
.
Subnet Mask
Subnet mask of your wlan0 interface/access point (which is also the
subnet of your Wi-Fi network).
Note
: The IP address settings of the wlan0 interface must be defined
under
Networking
>
Interfaces
>
wlan0
.
IP Address Range
– Start Address
Enter here the start of the address range that the DHCP server shall
use for assigning IP addresses to clients.
IP Address Range
– End Address
Enter here the end of the address range that the DHCP server shall
use for assigning IP addresses to clients.
Default Gateway
Enter here the IP address of the default gateway that the DHCP
server shall assign to the clients. If no other router/gateway is
available, enter here the IP address of your wlan0 interface/access
point.
DNS Server List
Enter here the IP address(es) of the DNS Server(s) that the DHCP
server shall assign to the clients. If no other DNS Server(s) are
available, enter here the IP address of your wlan0 interface/access
point. (The netFIELD OS will automatically forward DNS requests.)
Separate multiple entries with commas.
netFIELD OnPremise | User manual
DOC200901UM02EN | Revision 2 | English | 2021-06 | Released | Public
© Hilscher 2021
