Local Device Manager
82/152
After having connected to a network the
Connect Network
message
appears:
Figure 48: Connect network message
Ø
Click
Proceed
to go back to the Wi-Fi page.
Note:
After connecting to an access point, the IPv4 address configuration
of the
wlan0
interface is by default set to
Automatic (DHCP)
. The
interface thus uses the IP address assigned to it by the DHCP
server of the Access Point. If you want to manually define a fixed IP
address (e.g. because a DHCP service is not available), click
Configure Interface
to open the
wlan0
interface configuration page
where you can reconfigure its IP settings.
Hidden Network
If you want to connect to a “hidden” network (i.e. that cannot be detected
and displayed under
Visible Networks
) and you know its SSID, you can
enter it into the
SSID
field, then click
Connect
button.
In the
Connect Network
dialog, you can save the connection as profile, so
that you do not have to memorize the “hidden” SSID for future use.
netFIELD OnPremise | User manual
DOC200901UM02EN | Revision 2 | English | 2021-06 | Released | Public
© Hilscher 2021
