hilscher CIFX M223090AE-CO/F, Руководство пользователя

Страница: 34 / 48

Dimensions 34/48
8 Dimensions
8.1 Tolerances of PCB dimensions
The manufacturing tolerance of the PCB dimensions shown is ± 0.1 mm
per milled PCB edge. For all indicated dimensions of the printed circuit
board, a tolerance of ± 0.1 mm (per milled edge) x 2 = ± 0.2 mm results for
the length L and for the width B respectively.
B = [width dimension of printed circuit board in mm] ± 0.2 mm
L = [Length dimension of the PCB in mm] mm ± 0.2 mm
The depth T of the PCB depends on the highest component used or the
PCB thickness plus the descenders. The thickness of the PCB is = 0.8 mm
± 10 %.
Note:
The dimensions (L x W x H) given in the section Technical
data [ } page 30] (or the identical information in the product data
sheet or on the Hilscher website) are rounded figures or the
respective total measure (for example, including the front panel).
CIFX M223090AE-CO\F | Hardware description and installation
DOC210203UM02EN | Revision 2 | English | 2021-09 | Released | Public © Hilscher 2021