hilscher CIFX M223090AE-CO/F, Руководство пользователя

Страница: 17 / 48

Installing the hardware 17/48
4.2 Requirements for operation
The following described requirements must be fulfilled when operating the
PC card.
Requirements Specification Refer to section
Hardware installation Operating the PC card CIFX M223090AE-CO\F requires
proper connection of the detached network interface
CANopen AIFX-V2-CO to the basic card. -
Communication
For the communication of a PC card (Slave) a CANopen
Master device is required.
To configure the Master device you need the device
description file with the name for:
·
CANopen Slave:
NETX 90 COS COS.eds
The settings in the used Master must match the settings in
the Slave.
-
Software installation cifX Device Driver as driver for the host interface (latest
version of the driver).
Device Explorer as software for downloading or updating the
firmware and configuration, as well as for setting the device
driver.
Communication Studio for configuration and diagnosis of
netX 90-based devices.
Revision or version status
of hardware and
software
[
}
page 8] and
References [ } page 37]
(documentation on drivers
and software)
Firmware download The user must select the firmware using the Device Explorer
software and download it to the PC card.
The firmware includes a communication protocol.
Parameter settings By use of the Communication Studio configuration software
the PC card must be parameterized.
Table 11: Requirements for operation
CIFX M223090AE-CO\F | Hardware description and installation
DOC210203UM02EN | Revision 2 | English | 2021-09 | Released | Public © Hilscher 2021