Installing the hardware
22/48
4.7
Uninstalling the hardware
Uninstall the PC card CIFX M223090AE-CO\F from your PC or connecting
device as described below.
1. Protective measures and safety precautions
Lethal electrical shock caused by parts with more than
50V!
Ø
Disconnect the power plug of the PC or of the connecting device.
Ø
Make sure that the power supply is off at the PC or at the connecting
device.
Personal injury, device damage due to hot-plug/hot-swap
Ø
Do not "plug" or "unplug" the PC card during operation.
Adhere to the necessary safety precautions for
components that are vulnerable with electrostatic discharge.
Ø
Make sure that the device is grounded via the endplate and the PC, and
make sure that you are discharged when you install/uninstall the device.
2. Uninstallation
Ø
Open the housing of the PC or connecting device.
Ø
Demount the detached network interface CANopen from the basic card.
Ø
Therefore pull the cable out of the cable connector fieldbus X802 (on
the basic card), as well as out of the cable connector fieldbus X103 on
the AIFX-V2-CO.
Ø
Loosen the screw that secures the basic card to the board.
Ø
Remove the basic card from the PCI Express M.2 slot.
Ø
Remove the detached network interface from the housing cover of the
PC or connecting device.
Ø
Close the housing of the PC or connecting device again.
4.8
Disposal of waste electronic equipment
Important notes from the European Directive 2012/19/EU “Waste Electrical
and Electronic Equipment (WEEE)”
Waste electronic equipment
This product must not be treated as household waste.
This product must be disposed of at a designated waste electronic
equipment collecting point.
Waste electronic equipment may not be disposed of as household waste.
As a consumer, you are legally obliged to dispose of all waste electronic
equipment according to national and local regulations.
CIFX M223090AE-CO\F | Hardware description and installation
DOC210203UM02EN | Revision 2 | English | 2021-09 | Released | Public
© Hilscher 2021
