User Manual of Network Video Recorder - User Manual
48
Figure 4. 7
Edit Schedule
III.
To arrange other schedule, leave the
All Day
checkbox blank and set the Start/End time.
Note:
Up to 8 periods can be configured for each day. And the time periods cannot be overlapped each
other.
IV.
Select the record type in the dropdown list.
Note:
To enable Motion, Alarm, M | A (motion or alarm), M & A (motion and alarm) and VCA (Video
Content Analysis) triggered recording and capture, you must configure the motion detection
settings, alarm input settings or VCA settings as well. For detailed information, refer to
Chapter
7.1
,
Chapter 7.2 and Chapter 7.5
.
The VCA settings are only available to the smart IP cameras.
Repeat the above edit schedule steps to schedule recording for other days in the week. If the schedule can
also be applied to other days, click
Copy
.
Figure 4. 8
Copy Schedule to Other Days
V.
Click
OK
to save setting and back to upper level menu.
VI.
Click
Apply
in the Record Schedule interface to save the settings.
Draw the schedule:
I.
Click on the color icons, you can choose the schedule type as continuous or event.
