User Manual of Network Video Recorder - User Manual
130
10.2
Configuring Privacy Mask
Purpose:
You are allowed to configure the four-sided privacy mask zones that cannot be viewed by the operator. The privacy
mask can prevent certain surveillance areas to be viewed or recorded.
Steps:
1.
Enter the Privacy Mask Settings interface.
Menu > Camera >Privacy Mask
2.
Select the camera to set privacy mask.
3.
Click the checkbox of
Enable Privacy Mask
to enable this feature.
Figure 10. 2
Privacy Mask Settings Interface
4.
Use the mouse to draw a zone on the window. The zones will be marked with different frame colors.
Note:
Up to 4 privacy masks zones can be configured and the size of each area can be adjusted.
5.
The configured privacy mask zones on the window can be cleared by clicking the corresponding Clear
Zone1-4 icons on the right side of the window, or click
Clear All
to clear all zones.
Figure 10. 3
Set Privacy Mask Area
6.
Click the
Apply
button to save the settings.
